In the industrial and automotive fields, a certain pressure value is usually set for the equipment when pressure reaches this value, the system will send an electronic signal to start the mechanical equipment which triggers a warning(such as a leak of equipment, an alarm,etc.).this is the plunger type pressure switch. The pressure can not exceed 600 bar.
| Performance Parameters | |||
| Model | Adjustment Range | Avg.Differential | |
| PSI Bar | |||
| 1 | 1.5-14.5 | 0.1-1 | Less than 10%of Actuation Point |
| 2 | 14.5-60 | 1-5 | |
| 3 | 14.5-145 | 1-10 | |
| 4 | 145-290 | 10-20 | |
| 5 | 290-600 | 20-50 | |
| Electrical | 100VA/42VDC Gold contacts may be required for less than 12 VDC and 20 milliamp |
||
Wetted material |
Diaphragm:Buna-N (standard) (optional EPDM,FKM,VITONQ HNBR) Housing:Brass Zinc-plated steel,304 Stainless steel,316L Stainless steel |
||
| Protection | Exposed Terminals -IP00 Flying Leads &Deutsch Integral -IP67 |
||
| Repeatability | ±3%of full set point range at 21℃ Ambient Temperature |
||
Switch type |
Creep Action | ||
| Mechanical life | 1,000,000 cycles | ||
Temperature range |
BUNA-N:-30℃~110℃ EPDM:-40-130℃ FKM:-10-120℃ VITONO:-40-130℃ HNBR:-40℃~130℃ |
||
Maximum Overload pressure |
1150 PSI (80 Bar) | ||
Weight |
0.07 kg |
||
